Poupuffe Inflatable Travel Cushion
Product Instructions and Safety Information
We recommend that you practice using this product at home before traveling , so that when you get on the plane, you are already familiar with it and have one less thing to worry about.
For all inflatable products, please follow our instructions regarding product testing within 2x24 hours after your order is received . If there is a defect in the product, contact the seller immediately to get a product replacement.
Inflation Test within 2x24 Hours After Delivery
- Let the product fill with air for 12 hours or overnight .
- Do not overfill with air .
- If significant air loss occurs, contact the seller immediately within 48 hours to protect the product warranty from factory defects.
About Poupuffe
When fully loaded , the Poupuffe measures:
📏 54cm (W) x 42cm (H) x 38cm (L) weighing 720 grams .
📏 PVC thickness 0.3mm (top covered with fabric).
When deflated (in packaging) , the size becomes 32cm x 17cm x 5cm .
Note : For airline measurements, only width and height are taken into account (total 92cm ).
🔹 Poupuffe is equipped with one white safety valve (pressure relief valve) and one air inflation/deflation valve .
🔹 The safety valve has a black and white rotating nozzle . Both must be turned clockwise to the stop to prevent air leakage.
🔹 In the event of an extreme change in cabin pressure or temperature, the safety valve will automatically release excess air to restore pressure to a safe level. This prevents the product from leaking or exploding as the aircraft climbs to altitude.
How to Inflate (Inflation)
- Once the seat belt light is turned off , take out the Poupuffe , stretch it out, and place it on the floor in the appropriate position.
- Make sure the two valves are facing you and are securely attached.
- Start blowing air through the gray valve in the upper chamber .
- When the Poupuffe feels firm enough , stop inflation and close the valve.
💡 Tips:
✅ Use a pump connector that fits the gray valve.
❌ Do not use pointed connectors that could puncture the bearings.
✅ To minimize noise , insert the pump into the valve before turning it on and turn the pump off before unplugging it.
✅ You may need to add air if the cabin pressure changes during the flight.
✅ Flip the Poupuffe over to use as a footrest (recommended for big kids and adults) .
✅ Practice inflation and deflation before the flight as the valve can feel tight at first.
How to Deflate (Deflation)
- Pull the gray valve to open. Air will not come out immediately because the air release button is still active.
- Insert finger into valve and press center button to manually release air .
- Press down until the air is almost gone.
- Roll the Poupuffe towards the valve to release any remaining air.
- Full deflation takes only a few seconds .
💡 Tips:
✅ To deflate faster , turn the white safety valve counterclockwise and force air out through the hole while folding the product in your lap.
✅ Immediately reinstall all valve caps to avoid losing them.
Safe Use & Other Things to Note
✔ Use Poupuffe only under the following conditions:
🔹 Safely stored during taxi, takeoff, and landing . Only deployed after seat belt light is turned off .
🔹 Not used in emergency exit rows .
🔹 Does not block aisle access for other passengers .
🔹 The deflation valve should face the aisle for quick access if necessary.
🔹 Keep child seat belts fastened at all times .
🔹 Children using Poupuffe must be supervised at all times .
🔹 The child's feet should be placed on the pad, not their head .
🔹 Only use on seats permitted by the airline (check with the airline before flying).
🔹 Make sure the product does not extend into the aisle and stays in your seat area.
Frequently Asked Questions (FAQ)
📌 Airline Information
Please check your airline's policy regarding the use of Poupuffes before your flight. Download this link to see the airline's guidelines for allowing inflatable airplane pillows.
📌 Allowed seating positions
📌 2 Usage Positions
Now, you can sit back, relax and enjoy your flight in comfort! ✈️